Details for Datsun 1600 mounting tray

 Click to enlarge
An S14 DE job being tested before dispatch
 

This is pretty much how we do all Datsun 1600 installations now. It works out rather nicely to use a large ally tray to mount all the bits 'n' pieces on. This tray mounts horizontally between the firewall and the bottom glovebox bracket. It allows good access to the ECU and all fuses/relays while still keeping them nicely tucked up out of the way.

3mm aluminium is used. We're currently doing these as a $60 option with all loom conversion jobs. This includes:

  • 3mm aluminium mounting tray with all holes/threads cut and all mounting hardware.
  • Aluminium Mounting brackets for ECU.
  • Fitting of ECU, relays, fuses and whatever other options are specified.
  • Securing of loom to tray.

So all there is left to do is bolt the assembly in place. Mr. Nissan has kindly provided two suitable holes in the firewall that we can use. Add two holes to the glovebox mounting bracket and you're ready to bolt it in.

Here are examples of some we've done. Details vary from job to job.

Click to enlarge Click to enlarge Click to enlarge
The first one - Pete R's DE setup being fitted to '72 510 Derek C's S13 DET complete with speed sensor interface, PLMS ECU re-map and 4 map switcher Jodie K's S13 DET with speed sensor interface and flash SPL modified ECU